Deadwood Removal in Eugene, Oregon

Dead branches high in a tree can fall without warning. We climb in, clear dead, dying and diseased wood from the crown and leave a healthier, safer tree behind.


Crown cleaning

Clear the dead wood, keep the healthy tree

Almost every mature tree carries some dead wood. Lower limbs on conifers die naturally as the canopy shades them out, storms break branches that then die back, and disease or insects can kill sections of the crown. On its own, deadwood is a normal part of a tree's life. Over a roof, driveway or patio, it becomes a hazard.

Deadwood removal, also called crown cleaning, is the most common type of pruning we do. Our climbers work through the crown with ropes and harnesses, removing dead, dying and diseased branches with proper cuts and lowering larger pieces so nothing crashes onto your property below.

It is one of the most valuable ways to care for large trees in Eugene, Oregon and Springfield, Oregon and the rest of Lane County, and it is part of our wider tree trimming and pruning service.

✓ Dead, dying and diseased branches removed from the crown

✓ Proper cuts that help the tree seal its wounds

✓ Larger limbs lowered by rope, not dropped

✓ Ideal for tall firs and mature shade trees near homes

✓ Branches chipped and the yard cleaned afterward

Safer canopies

Map pin icon

Eugene, OR


Why it matters

The benefits of removing deadwood

Deadwood removal is a modest job compared with a full removal, but it pays off in safety, tree health and appearance. It is also a chance for our climbers to look closely at the upper crown, where problems are often hidden from the ground.

Many homeowners live with dead branches for years because they cannot see them well or assume they are harmless. Then a winter storm drops one across a car or through a skylight. Clearing deadwood on a regular schedule is one of the simplest, most affordable ways to prevent that kind of surprise.

Here is what clearing deadwood does for your trees and your property. If a tree is more dead than alive, see our dead tree removal service instead.

Shield with check mark icon

Fewer falling branches

Dead limbs are brittle and can drop in a light wind. Removing them protects roofs, cars, patios and the people who spend time beneath the tree.

Heart icon

Healthier canopy

Diseased branches can be a source of decay. Removing them with clean cuts can help limit the spread of problems into healthy wood.

Tree icon

Better storm resilience

Dead branches are often the first to break in wind and ice. Clearing them before winter reduces debris and the chance of damage.

Leaf icon

A cleaner look

A crown free of dead, gray branches looks fuller and more cared for, which makes a real difference on large trees that frame your home.

Clipboard with check mark icon

An inside view

While working in the crown, our climbers can spot cracks, weak forks and other issues and report them to you.

Map pin icon

Light on the tree

Because deadwood removal takes out wood the tree no longer uses, it is one of the gentlest forms of pruning and can be done at most times of year.

How a deadwood removal visit works

Deadwood removal is a focused, efficient job. We identify which trees and branches need attention, set up to protect the area below, and then climb through the crown methodically. Most visits combine deadwood removal with a little light pruning where it makes sense, so each tree is left in good shape until its next check. The crew also reports anything unusual they see while aloft.

01

Magnifying glass icon

Spot the deadwood

Point out the branches that concern you when you request a free estimate. Leafless limbs and gray, barkless wood are easy to see from below.

02

Magnifying glass icon

Plan the cleaning

Jaymie reviews each tree, notes the size and location of dead wood and what is beneath it, and outlines the work in your quote.

03

Clipboard with check mark icon

Protect the ground

The crew sets up drop zones and protects beds, decks and vehicles before any climbing starts.

04

Shield with check mark icon

Climb and clean

Climbers move through the crown with ropes and harnesses, removing dead, dying and diseased branches with proper cuts.

05

Chainsaw icon

Lower larger limbs

Bigger dead limbs are tied off and lowered by rope so brittle wood does not shatter or bounce on impact.

06

Leaf icon

Chip and clean up

Branches are chipped and mulched when possible, and the yard is raked and blown clean before we leave.

Client reviews

5.0

Stars on Google from 14 reviews

What neighbors say about our tree work

Climbers with ropes and harnesses


How it works

Deadwood in tall firs and big shade trees

Douglas firs and other conifers naturally shed lower limbs as they grow, and those branches often stay attached long after they die. On tall firs beside homes, that dead wood can sit far overhead where it is easy to forget. Large hardwoods such as bigleaf maple and Oregon white oak also build up deadwood in their crowns over time.

Size can be deceptive from the ground. A dead limb that looks like a stick from the patio may be as thick as an arm and long enough to reach the roof once it falls. Seen from a climbing line in the crown, the true size and condition of each branch becomes clear, and so does the safest way to bring it down.

Climbing is the safest way to reach this wood without damaging the tree or the yard below.

Deadwood removal pairs well with other pruning. Crown thinning work opens a dense canopy, and clearance pruning lifts low limbs away from roofs and drives, all in the same visit.

Combining the work saves a second setup and gives you one clear plan for each tree. Our clients often schedule a crown cleaning every few years on the big trees closest to the house, and it becomes a simple routine rather than a reaction to the last fallen branch.

We remove deadwood across Lane County, including Lowell, Oregon and Pleasant Hill, Oregon and nearby foothill communities.

Why do trees have dead branches?

Trees lose branches for several normal and not so normal reasons. Lower limbs die when the upper canopy shades them out, storms break branches that then die back, and drought, disease or insects can kill sections of the crown. Some deadwood is normal, but sudden or heavy dieback is a sign to look closer.

Conifers such as Douglas fir are especially prone to holding on to dead lower limbs, while broadleaf trees often show dead wood at branch tips first when they are under stress.

How to spot deadwood from the ground

  • Branches with no leaves or needles in the growing season
  • Gray, smooth wood where bark has fallen away
  • Brittle twigs that snap off in your hand
  • Fungus or conks growing along a limb
  • Limbs that look different in color from the rest of the crown
  • Branches hanging broken from a storm

Do not shake it loose: Pulling on or tapping dead branches from below can bring them down on you. Leave high deadwood to trained climbers.

Is deadwood removal good for the tree?

Yes. Removing dead, dying and diseased branches with proper cuts can help limit the spread of decay, reduces the weight of useless wood and lets the tree focus on healthy growth. It is one of the gentlest pruning types because it removes wood the tree no longer uses.

Will removing deadwood stress the tree?

Very little, since the wood removed is already dead. Cuts are made carefully to avoid damaging living tissue.

Should I leave some deadwood for wildlife?

On open rural land, some owners leave dead wood where it poses no risk. Near homes, safety comes first.

Do you work in rural areas?

Yes. We clean the crowns of tall firs on acreage near Fall Creek and Dexter regularly.

How do arborists remove deadwood from tall trees?

Climbers ascend the tree on ropes and harnesses, positioning themselves to reach dead branches throughout the crown. Small dead twigs are cut and dropped into a clear area, while larger limbs are tied off and lowered by rope. Each cut is made just outside the living collar so the tree can seal the wound.

  1. Survey from below. The crew identifies dead limbs and plans the climbing route.
  2. Set the climbing line. A rope is placed high in a strong part of the tree.
  3. Work top down. Dead wood is removed from the top of the crown downward.
  4. Lower the heavy pieces. Larger dead limbs are rigged and lowered to the ground.
  5. Inspect along the way. The climber notes cracks, cavities or weak forks.
  6. Clean up. Branches are chipped and the area is raked and blown clean.

How is deadwood removal different from dead tree removal?

Deadwood removal takes dead branches out of a living tree so it stays safe and healthy. Dead tree removal takes down a tree that has died entirely. If most of a tree's crown is dead, removal may be the better option, and Jaymie will explain the difference during your free estimate.

Not sure which you need? Describe the tree in our estimate request form and we will help you decide. You can also read about crown reduction work for trees that have grown too large for their space.

Free quotes: Every deadwood removal job starts with a free estimate, and you can ask about our senior and military discounts.

Can deadwood removal be combined with other pruning?

Yes. It is often paired with thinning or raising in the same visit.

Will you clean up all the branches?

Yes. Branches are chipped and the yard is cleaned before we leave.

Is it worth doing on small trees?

Small trees can often be cleaned from the ground. We will tell you if the job is simple enough to handle yourself.


Common questions

Frequently Asked Questions

Common questions about deadwood and crown cleaning. Dead branches are one of the most frequent reasons people first contact us, so these answers cover what we hear most during estimates. For more pruning answers, see our tree care FAQs anytime.

    What is deadwood removal?

    Deadwood removal, also called crown cleaning, is pruning that removes dead, dying and diseased branches from a tree's crown. It makes the tree safer, can help limit the spread of decay and improves its appearance. It is one of the four main pruning types we offer through our tree trimming and pruning service.

    Is dead wood in a tree a sign the tree is dying?

    Not necessarily. Some dead wood is normal, especially lower limbs on conifers shaded by the canopy above. Heavy dieback in the upper crown or a sudden increase in dead branches is more concerning. Our tree health assessments can tell you which situation you have.

    When is the best time to remove deadwood?

    Deadwood can be removed at almost any time of year because it does not affect living tissue. Many clients like to have it done before the winter storm season, when dead branches are most likely to break and fall.

    How often should deadwood be removed?

    For large trees near homes, a check every few years is a good habit, along with a look after major storms. Trees with ongoing health problems may build up dead wood faster. Jaymie can suggest a schedule for your trees during a free estimate.

    Can you remove deadwood from very tall trees?

    Yes. Our climbers use ropes and harnesses to reach dead wood high in tall firs and large hardwoods. Larger limbs are lowered by rope instead of dropped, so roofs and gardens below stay protected. You can see examples of our climbing work in our project gallery anytime.

    Is deadwood removal enough to make a tree safe?

    It removes one of the most common hazards, but it does not fix structural problems like decay in the trunk or failing roots. If those are present, our tree risk assessments service is the right next step.